Arcam A28 Betriebsanleitung PDF herunterladen (Seite 7)

E-7

English

Pre-/power-amplifier connections

PRE OUT

To use your A28 as a dedicated pre-amplier, or as part

of a bi-amp’ed system, connect the PRE OUT sockets to

the input sockets of your power amplier.

Recording loop

e A28 is equipped with a recording loop, for use with

recording devices (such as a CD recorder, DAT recorder,

cassette recorder, VCR, PVR etc.).

AV RECORD OUT

Connect these output sockets to the input sockets of

your recording device (usually labelled RECORD or IN).

AV PLAY IN

Connect the output sockets of your recording device

(usually labelled P LAY or OUT) to these inputs.

If you do not have a recording device, you can use this

input for other (line-level) equipment, such as a TV,

DVD, CD player, radio tuner, PVR, etc.

Audio inputs

Although the inputs are labelled for specic devices, all

have the same characteristics and each may be used with

any line-level product. e exception is the Phono input

(see page 14 for the specication).

DVD

Intended for the analogue outputs from a DVD-player.

Intended for the analogue outputs from general audio-

visual equipment, such as a VCR, digital TV/satellite

receiver, or Nicam tuner.

TUNER

Intended for the analogue outputs from an FM, AM or

DAB radio tuner.

Intended for the analogue outputs from a CD player.

AUX

is is intended for general use, or for connecting an

iPod® via an Arcam rLead or rDock. However, it can

also be used to connect the analogue audio outputs

of any unit with a line-level output (such as a games

console or set-top box).

SAT

For connection to a satellite TV receiver or cable box.

Controlling the A28 from a second room

e A28 will require a remote pick-up device with a 12V external power supply (such as a Xantech Dinky

Link) located in Zone 2, together with a power amplier (such as an Arcam A28 or P38) to complete the

system.

e diagram shows the wiring scheme, which also applies to other IR pick-up devices commonly available.

e A28 can also provide a +12V trigger output to control devices such as the power amplier in Zone 2.

e +12V trigger is active when the unit is ‘On’.

+12V

Signal

Tip = Signal

REMOTE IN

Dinky Link, located in Zone 2

Sleeve = 0V

Phono input

e phono inputs provide a pre-amplication stage to

treat the low-voltage output from a moving magnet

cartridge. If you have already an external phono amplier

that you wish to use, connect its output to one of the line-

level inputs, such as the AUX input.

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare

Arcam A28 Betriebsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audioverstärker Arcam A28