Arcam RCUBE Betriebsanleitung PDF herunterladen (Seite 23)

Operate

E-23

e rCube has the ability to have its soware

upgraded by the user. is allows additional

features to be added and allows compatibility

with yet to be released iPods and iPhones.

You should only upgrade the

rmware if directed by Arcam or

your dealer

To upgrade the rCube you will need a USB ash

drive and a PC or laptop computer that can

connected to the internet.

1

Download the rmware le to your

memory stick.

Visit www.arcam.co.uk to download the

latest firmware and place the file on your

USB flash drive.

There must not be any other files present

on the drive.

2



With the rCube o, insert

the USB ash drive.

First make sure the rCube is

fully powered o (using the rear

panel switch) and then insert

the memory stick with the

downloaded le into the USB

style upgrade port on the rear

panel of the unit.

3

Power on the rCube into standby mode

Turn the rCube on by pressing the power

rocker switch on the

rear panel. Press and

hold the standby

button until the power

LED ashes red. e

power LED will ash red rapidly while the unit is

upgrading. When the LED will stops ashing and

glows continuously, the rCube is updated.

4

Remove the memory stick

It is now safe to remove the memory stick.

Upgrading the Firmware

IO

If the rCube is put into upgrade

mode accidentally, turn o the power.

When the power is turned back on,

the rCube will operate normally.

1 2 ... 18 19 20 21 22 23 24 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare